Army for Sale: Skaven Horde....

Update!: Both this and my Undead Skaven army have been sold. 

 Alas, it's time for the last of my WHF armies to go; farewell, my skittering hordes of vile ratmen. We had a blast, and I do mean a lot of blasts. The skaven were an army made to go sideways, and you got a laugh out of it every damn time. 

A bunch of Black Tree Designs models (supplemented by 5 slaves from another range) these metal Clanrats were cheaper as a mob of 20 than a box of GW plastics. Ditto the Plague Monks, Stromvermin, and Gutter Runners below. They didn't come with banners, just poles, so I made some suitably ratty ones from actual cloth scraps from the lining of an old backpack. 

The frenzied plague monks were actually the best unit in the whole codex. Their speed combined with multiple attacks made them an absolute buzzsaw. Didn't wear a scrap of armor, either. 

Stormvermin looked tougher than they played, which was fine because I didn't want the enemy throwing his tougher units against, say, my weak clanrats

This sneaky distraction created as many problems as they'd solved for me, and more than once caused a chain-reaction panic run back to my edge of the board. 

The burly Master Moulder at the end was converted from a Reaper Orc. Some buck teeth and green stuff went a long way to making a buff taskmaster, and believe me, the skaven need keeping in line. I always liked clan Skryre, too. Their weird ramshackle inventions gave the army as a whole a lot of character. 

As warmachines went, the Screaming Bell was a pretty good one, although you had to have your clanrats push the damn thing everywhere, and when they went running.... well...

Perhaps my all-time favorite warmachine was the Doomwheel. This one was built out of the parts I could order from the very much missed GW bits site. They didn't have all the bits on order, so I had to convert up the rest; the back cogs came from some dwarf warmachine or other from another range. Yes, those are are crossbows on the hubs instead of huge blades, which proved to be a boon in the long run because it's easier to transport on its side. 

It was great when it worked, but when the warp lightning cannon misfired, ooooooh boy. Kiss anything nearby good-bye.

The two big Rat Ogres are, in fact, Reaper models converted up to be suitable ratty. At the time, like many others in this army, they were substantially cheaper than the equivalent GW models. Only the one in the middle of the upper 3 is a GW one, in fact. The other two are also from Black Tree. 

While the unreliable Warpfire Thrower always worked reliably for me, the Ratling Gun once scythed down two blocks of my infantry like so much wheat. I never laughed so hard during a wargame in all my life. 

Those three Jezzail teams on the bottom used cannons from another range, but I think together they all look suitable ramshackle enough to be a skaven unit. At the time, you couldn't do much better for missile troops than skaven jezzails. (sigh.)

Buy them together with my undead horde and you get a truly monstrous army LOL.

Ebay listing here. 

Vampire Skaven Part 3: The Doomtrain

Now that we're past the footsloggers, here's my favorite model in the entire army, if not my Warhammer Fantasy collection. The Doomtrain came about in those heady days when you could just order bitz willy-nilly from Games Workshop. The Storm of Chaos had just come out (yes, I've had it that long) and with it, the lovely Hellcannon kit in all its awful glory. About the same time I was painting dwarves for my friend Brian, and he paid me in trade with an Imperial Steam Tank (yes, the old-school metal model). A Hellcannon and a few bits orders later, and this monster came about.

This is another one of those cases of a model practically building itself. The Hellcannon and Steam Tank parts went together like they were made for each other, and the Screaming Bell bits followed shortly thereafter. The thing was an absolute joy to build and paint, to boot, from the little furnace full of soul-fire in the back to the wight-skaven drivers. It's also too long for even a chariot base, so damned if I know how I'll ever use it in battle.

The little stools of the Warp-Lightning Cannon's engineer minders actually fit right into the little peg-hole in this steam tank deck piece. I particularly love the little gauges and dials, which fit the skaven to T. 

The huge jaw piece for the Hellcannon still sits in my bits box, but the bigass skull piece needed minimal embellishment before fitting to the Steam Tank hull-turned-cowcatcher. I fitted skaven icons over the Empire shield mountings, and the warpstone reactors just fit the model perfectly. The end-bits even run into the grooves on the massive cog-wheels. 

The warlock-engineer hanging off the little platform to the side was an afterthought, as were the chains streaming off of the smokestack on the front. Of course, since this thing is powered by the souls the machine sucks out of the living, what's the stack for? I don't even think the steersman can see over it, anyway. If I could come up with a base to fit it, I might even enter it in a Games Day mini competition. I'd have to come up with track bits that would even hold it up, but it weighs a ton, so stability is ensured. If I did enter it, I'd also want to make a tender for it, if not some other, equally interesting car. 

Here's a shot from the other side. No crewman here, owing to the theory that odd numbers and asymmetry are more interesting. Those warpstone reactors look cool any way you turn them, so no problems with symmetry here, either. I thought of fielding it using Black Coach rules, but it looks even more durable than one of those, if not more deadly to the surrounding troops. 

This is a beauty shot, not an actual battlefield pic. If it were, the thing would steamroll right over that poor rat swarm in the front. Next time, we polish off the army showcase with cavalry. 

Vampire Counts: Skaven Pt. 2: Infantry

Continuing the saga of undead Skaven and the necromancers who love them, we have the backbone of every army: ranks and ranks of infantry:

Keep in mind the new book was not yet out when I was building this army, and at the time I was favoring skeletons as troops instead of everyone's favorite, zombies. Cheap the zoms may be, but I preferred the idea of troops that struck on a reasonable initiative number.  Mega Miniatures puts out blisters of 20-25 skeletons for around $20, among other things, and these were perfect starters for the army. Add in a single Clanrats box and you have all the bits you need for pretty much anything having to do with skaven and the dead in any combination.

Every 5th head or so in the Clanrats box is a bona fide Skaven skull, which is fantastic. I hewed at every other head with an X-Acto blade until they looked sufficiently skeletal. The Mega Minis skeletons are quite characterful,  being dressed in tattered armor and equipped with all kinds of weapons, from axes to greatswords. Though Skaven themselves are kind of stumpy (at least, the last edition's were) the more upright skeletons mesh well with the current designs.

When you combine the skeletons with Skaven parts and paint them appropriately necrotic, you get a whole new level of character. The fleshier ones could even be zombies, if you want.

Even given the poses and different stature, all of these actually rank up in a tray quite well. I didn't even do any pre-measuring and ranking. 

And the obligatory command, complete with a nice Skryre rune on the banner. The musician and banner parts are courtesy of the handy-dandy command sprue from the clanrats box, which inexplicably has the banners and gubbins of other races on it. Cheap to cast, I s'pose.

The Grave Guard are lovely minis from Privateer Press' Iron Kingdoms line. I got a pretty good deal on some from eBay, and being three to a blister, they were quite a steal at the price. Steam-powered Frankenstein's monsters seem like something a Skaven Necromancer would bolt together in his lab for heavy infantry, and power fists say "instant death to medieval soldiers" to me, so they're a reasonable stand-in for regular Grave Guard. 

For some reason, I was never quite sold on the idea of banners until I actually had to make them for fantasy armies, and then I found I rather enjoyed them. That chap with the bell might've been a monk or a beggar in life. Now he stomps into battle, forlornly ringing his bell. 

Since I play more 40k than WHF these days, I've been using more and more of these fellows as servitors in one way or another. My Adeptus Mechanicus army needs them for its artillery pieces as crew. If there's ever an official AdMech codex with servitors as an entry, I'll have enough to send a horde of them at an enemy (or failing that, a squad or three)

Next in the series: Cavalry.  (Yes, that means mounted Skaven.)

Vampire Counts: Skaven Pt 1: Characters

I always liked the Vampire Counts army list from Warhammer Fantasy, but playing a bunch of Bela Lugosi-style vampires wasn't my cup of tea. I mean, really? Guys in red capes and crap like that? Come on. Besides there's lots of fluff text in the Codexes and old issues of White Dwarf about the Skaven raiding ruins and graveyards for warpstone, stuff to eat, etc.  It makes more sense (to me, at least) that some warped Warlock-Engineer from Clan Skryre went even more crazy and decided to start doing things like reanimating dead rats, making Frankenstein's Monster style boss monsters, etc etc. I mean, the Skaven do that sort of thing anyway (Boneripper, Clan Moulder, etc). Thus, my third WHF army was born. 

This fellow was really the seed of the whole thing. I had been using him in my stock Skaven army as a Lord-level character. Based on an Reaper Orc character, he really was too monstrous to be any old rat with delusions of grandeur. Thus, the figure got a complete makeover (sorry, no before- pictures) and gained white skin, dingier-looking armor, and a wicked blade-arm where his weensy little sword used to be. You can picture him storming back into the rat-warren in the dead of night and sucking the blood out of everything in sight. Of course, such a monster needs a sidekick, which leads us to the Skreinlich Skremmler, the Sklichemaster:

I had originally planned to make him a rat-parody of the old Heinrich Kremmler model, complete with wide-brimmed hat, but when I saw a particular steampunk wizard from the Warmachine range (my old standby for years to come) I thought what an awesome Skaven he'd be, and voila! My necromancer was born. There's a champion character from the Necromunda range that rides a humongous undead rat, so maybe another character will appear someday, riding a "zombie dragon" with helicopter engines and rotors in place of wings.  Ahhhh skaven engineering.... Speaking of which:

This mad fellow and his crazy-ass mount came after I had finished the skeletal-giant rat cavalry. A steam-powered wight-skaven with a warpstone glaive packs quite a punch in the battle line. Another reason I wanted to use a vampire  counts army was their fear-generating cavalry, something neither my first army, the Dwarves, nor my second, Skaven, had access to. The new Skaven book has all sorts of new, awful things (for that matter, so does the new VC book) but until I can find another WHF opponent around here, upgrades to that army will have to wait a while. 

Here's another view of the rear of this thing. It really is one of my favorite models, from the mono-wheel and heavy suspension to the warpstone globes behind the saddle. Come to think of it, he sort of looks like a little Doomwheel. For my skeletal cavalry (which you'll see in part II of this series) I ordered a bunch of skeleton horses from Reaper (their prices are real steal!) and then cut and bent the pewter parts until they resembled a rat skeleton I found photos of on the web. I botched one rather badly, but the ribs, head, and tail were intact, so this model was really sort of an accident as well. It was another case of a model just building itself after a certain point. 

In life I suppose he was a bit of a daredevil, as all Skaven are, so I gave him a WWI German helmet made out of an old Tamiya 1/35 infantry hat and a bayonet. That shield is a leftover from the Black Tree Design regiments I used to build my skaven army. His skull is from the skaven plastic sprues I eventually got on the cheap on eBay. Who knew every 5th head was a skull? It helped when I was building those regiments of skeletal Skaven.

This fellow is one of two Wight characters to join either my Grave Guard or Skeleton formations. He's a simple conversion based on a re-bent Necron Flayed one, as is his drinking buddy:

A bit more heavily-armored than his fellow, he fits in a bit better with my Grave Guard models, who are more than a little "enhanced" themselves. I guess that Skavromancer thinks power fists are as good as Wight Blades. 

Next time, Cavalry! Yeeeehaaa!